1/8
Solenoid Operated Directional Valves, DSG-01 Series
DSG-01-3C4-A120-N1-5080 DATASHEET
These
are Solenoid Operated Directional Valves of high pressure, high
flow
and low pressure drop, the features of which can be materialized
by
employing a powerful wet type solenoid and the rational flow
channel design.
High Pressure & High Flow Rate
In comparison to our existing lines, both the pressure and flow of
these valves are much increased.
- ·
Max. Operating Pressure: approx.
10 % increased [31.5→35 MPa (4570 →5080 PSI)]
- ·
Max. T-Line Back Pressure:
approx. 30 % increased [16→21 MPa (2320 →3050 PSI)]
- ·
Max. Flow Rate: approx. 60 %
increased [63→100 L/min (16.64→26.42
U.S.GPM)]
Low Pressure Drop
The pressure drop of these valves is reduced by 10 % from 1.0 to
0.9
MPa (145 to 131 PSI), in comparison to our existing lines*; the
valves
effectively reduce the energy consumption of the unit.
{* At Flow Rate: 60 L/min (15.9 U.S.GPM), Spool Type: 3C2 (P→A)}
·
Compact &
Small Mass
Despite of high pressure, high
flow and low pressure drop, these valve
bodies are compact and
lightweight with DC double solenoids; the
overall length and mass are reduced from 210 to 205 mm
(8.26 to 8.07
inch) and from 2.2 to 1.85 kg (4.85 to 4.08 lbs), respectively.
·
Shock less
type available
In addition to the standard valves for high pressure
and high flow, a
Shock less type capable of
minimizing noise and vibration in piping
during spool changeover is also available.
·
Stable
Operation
Due to the powerful magnetic and spring force of the
solenoids, these
valves exhibit a high tolerance
to contaminants and especially stable
operation.
·
IP65-equivalent
high dust- and water-proof
These valves demonstrate excellent dust- and
water-proof
characteristics, in compliance
with I. E. C. Pub. 529. IP65 and JIS C
0920 IP65 (dust- and jet-proof type).