PRICE ON REQUEST
"A" Series Variable Displacement Piston Pumps – Single Pump,
Pressure Compensator Type
A70-F-R-04-H-S-60 DATASHEET
INTRODUCTION
In order to get steadily controlled pressure and flow, bleed
air by loosening the air vent screw and fill solenoid armature with operating
oil.
- Manual Adjustment Screws :
Manual adjustment screws may be used for initial running
adjustment or in case of electrical failures in order to adjust pressure and
flow temporarily. In case of normal use, put the manual adjustment screws back
in their preset positions.
- Position of Cable Departure :
Position of cable departure can be changed
- Connection of Surge Cut-off Valve to "A" Series
Pump :
If using surge cut-off valve (SF1105-A-10), connect between
pilot port "PP" of this pump and port "PP" of surge cutoff
valve as pilot piping (refer to drawing below). Inside diameter of pipe should
be more than 8 mm(.32 in.).